I'm not going to tell you that you should use American Steel to circumvent your range rule against steel cased ammo, but I will say that you could probably use it for that purpose. With prolonged use I expect the gun to be dirtier than the same with traditional ammunition. Long term use will tell the tale.įreedom Munitions using a brass plating doesn't mean that the casing expands like brass, but since it's using American powder and primers it's still far cleaner than most all other steel cased ammo you'd be using. I was unable to find any signs of brass shavings or other debris in the weapons used. I'm told that this doesn't cause any additional wear and tear. These bits follow the round down the barrel and mix with the burning powder. Since the casings are plated inside and out, some microscopic bits of the brass inside flakes off during combustion. It's surprising the first time you see it. It's noteworthy to mention that the muzzle flash is very sparky. I didn't experience any issues with function or feeding, nor would I expect to with just a few hundred rounds. Some formal accuracy testing with a bench may be warranted in the future. I am by no means a precision Olympic 50m Pistol shooter but just casually shooting offhand at 10m produced results I wasn't disappointed with. The recoil seemed exactly on par with Freedom's remanufactured line and also with a number of other American commercial loads. I loaded a pile of pistols, some targets, and several hundred rounds of American Steel into my range bag and headed to find out. No doubt it's boxer primed because all of their machines are setup for it already. Although this means it could possibly be reloaded, I'm advised that Freedom Munitions doesn't recommend it. Normal storage or transport like rolling around in your range bag is unlikely to cause any issues.Īmerican Steel is also boxer primed. I used a tool to intentionally scrape one up and you can see the raw steel beneath. Not all of the brass received is suitable for reloading and would otherwise be sold as scrap. But why brass? I don't know for sure but I have a theory: As a company that collects spent brass from ranges across the nation, if there's one thing Freedom Munitions has in bulk, it's brass. It serves the same purpose of protecting from moisture and giving a slicker surface for feeding and extraction. It's still much better than a raw steel case.Īs mentioned, what Freedom did instead of a lacquer or polymer coating was plate brass directly to the steel. And though some might protest that last bit, lacquer doesn't melt and cause stuck cases-the fact that steel cases don't fully expand to the chamber and therefore allow for more fouling, does. The coating is to help prevent environmental fouling (untreated and exposed steel can rust very quickly) and to aid in feeding and extraction. Generally steel cased ammo, aside from being foreign and cheap, is coated with a lacquer or polymer and is berdan primed. Aesthetically I can't tell the difference between American Steel and any other old ball round (if anything I found the Freedom offering to be shinier than most). Freedom's American Steel line is just like any other new production ammo-it's just that the case itself is steel that's plated with brass. They're calling it American Steel, and admittedly the name does have a nice ring to it.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |